5.4 C
Munich
Tuesday, November 5, 2024

Resetting Nighthawk R7000 Router: A Complete Guide

Must read

If you are facing any issue with your Nighthawk R7000 router, be it routerlogin.net not working, router firmware update failed, router login details not working, etc., then resetting would be one of the finest options for you.

Resetting Nighthawk router is the simplest process very well-known to fix big and small issues with your R7000 device. So, without thinking much, have a quick nudge below and know how to reset Nighthawk R7000 router in minutes. Let’s start over!

Why to reset Nighthawk Router?

Nighthawk R7000 router reset process is needed when:

  • Nighthawk router is not working
  • Unable to log in to Nighthawk router
  • Router can’t connect to internet or getting router connected but no internet issue
  • Unable to connect to router’s WiFi
  • Failed to update router’s firmware
  • Can’t set up Nighthawk R7000 router
  • Continuously getting red, amber, or no LED issue on the router
  • Unable to access Netgear Genie setup wizard via routerlogin.net or 192.168.1.1
  • Nighthawk app not working
  • Netgear Genie continues to appear

So, these were some common reasons that have led you reset your Netgear Nighthawk router. Now, without much ado, let’s provide you instructions to reset your Netgear Nighthawk router.

Netgear Router
Netgear Router

Check Also: Netgear EX2700 Setup And Troubleshooting: Tips Included

Resetting Nighthawk R7000 Router

There are two methods following which resetting Nighthawk router will be easier for you. You can use any one of it as per your comfort and understanding. They are:

  • Resetting Nighthawk router using the reset button
  • Resetting Nighthawk router using the web-user interface

Now, we are going to shed lights on both the methods one by one:

READ ALSO:  Different Ways to Measure the Reliability of Your Web Hosting Provider

1. Resetting Nighthawk router using Web Interface

  • Launch a web browser from a computer that is connected to your home WiFi network. If you have a laptop, you can also make it in use.
  • Enter routerlogin.net in the URL bar of an up-to-date web browser. Use 192.128.1.1 in case you get routerlogin.net not working error.
  • Nighthawk R7000 router login window displays.
  • Enter the router’s default username and password into the given fields.

If you have any doubts regarding default login details of your device, we suggest you refer to Netgear Nighthawk R7000 manual.

  • After entering the router’s login details correctly, the BASIC Home page or Dashboard or your R7000 device displays.
  • Reaching here, click on “Advanced” and then “Reboot”.
  • Wait for a couple of seconds for your Nighthawk R7000 router to complete the reboot process. It might take some time.

Kudos! The resetting process of your Netgear R7000 router is completed using the web interface. Now, it is suggested to perform the Nighthawk R7000 setup process again.

2. Resetting Nighthawk router using Reset Button

Walk through the guidelines provided below and know how to reset your Nighthawk R7000 router using the reset button. Here we go:

  • First of all, you have to ensure that your Nighthawk R7000 router is properly plugged in to a damaged-free wall outlet.
  • Now, locate the reset hole on your R7000 device and once found, press it using a pin or a paper clip. If you have any other similar object, feel free to make it in use.
  • Wait! Do not get impatient to release the router’s reset hole. Keep holding it for some time. Allow your router to reboot properly.
  • If you think that you have given enough time to the router’s reset hole you can release it.
Nighthawk Router

Another Guide: Guide to fix Netgear Router not connecting to the Internet Problem

And, there you are! Your Netgear R7000 router is reset using the reset hole. But that’s not only enough! You have to reconfigure it from the scratch. And, after setting it up in a proper way, update Nighthawk router firmware right away. Updating the router’s firmware ensures that it will perform for you in the most effective yet smooth way ever. Apart from this, updating the R7000’s firmware will also give you improved security, outstanding features, and a cool performance that never ends.

The Last Words

As New Year is around the corner so nobody can sacrifice the performance of their Netgear Nighthawk R7000 router, right? Resetting Nighthawk R7000 is one of the best Netgear router troubleshooting tips to fix various issues with the device. So, don’t be tensed if you face any sort of issue with your Nighthawk device. Just give it a fresh start and get ready to make the most out of it again.

More articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest article