NETGEAR Orbi WiFi System offers high-speed WiFi to access all over the home or office. Apart from this, it is the best device to eliminate dead spots. Orbi comprises two similar-looking devices but each one of them has a different role. One unit is Orbi router whereas another is Orbi satellite.
Orbi router has three LAN and one WAN port. On the other hand, Orbi satellite has four LAN ports which can connect up to four wired devices at the same time. NETGEAR Orbi router connects to modem while Orbi satellite make WiFi signals reach in every corner of home. In this guide, we have talked about how you can perform Orbi setup using the orbilogin credentials.
How to Set Up NETGEAR Orbi WiFi System?
Let’s have a look at how to set up NETGEAR Orbi router and satellite:
- Unplug the modem and remove its battery as well.
- After a couple of minutes, plug in the modem to a wall socket.
- Turn on Orbi router.
- Connect modem and Orbi router.
- Next, apply power to Orbi satellite.
- Wait until Orbi satellite’s LED becomes magenta.
- After that, it turns into one of the following colors: solid amber or solid blue.
- Make a connection between Orbi satellite or router and computer.
- Log in to Orbi router via orbilogin.net and follow the steps given on the screen.
Thus, a NETGEAR Orbi WiFi System has been set up. Now you can connect multiple devices to Orbi without losing range and speed.
How to Troubleshoot Orbi Setup Issues?
Sometimes, Orbi login page doesn’t open even if you enter correct username and password. Instead, it displays an error message saying ‘Connect to the OrbiWiFi Network’. The first and foremost solution to this issue is to exit current browser window, open a new window or another browser and try again.
In case you are still stuck with the orbilogin not working while trying to set up your Orbi device, follow these NETGEAR troubleshooting steps:
- Ensure the Orbi device is plugged into an active power source.
- Check the internet speed you are getting from ISP.
- Reboot all networking devices such as modem and Orbi router.
- Try using default IP address of Orbi router.
- Access the Orbi wireless network.
- Be sure that the connection between modem and router is accurate.
- Use another WiFi-compatible device to connect to Orbi router.
- Reset your devices to default factory settings.
If none of the above-mentioned steps work for you, then you have got to restore your Netgear Orbi device to its default factory settings. Once done, try to set up your device from scratch. For this, use any method that you prefer.
Netgear Orbi Setup [Important Points]
As mentioned in the beginning of this post, Orbi WiFi system is meant to create dedicated high-speed WiFi connections for your internet service. It is a combination of an orbi router and orbi satellite. The first one connects to your modem or gateway while the later extends the wireless signals all over the house or workplace. No matter how carefully or accurately you set up the device, you may come across various issues due to common mistakes such as the Orbi satellite not connecting issue.
Sensing this need, we really hope that you will be able to troubleshoot the Netgear Orbi setup issues that you were experiencing with the help of the troubleshooting hacks mentioned above in this post.
The Bottom Line
After following the information given in this post, not just will you be able to perform Netgear Orbi setup but also troubleshoot issues in case you face them during the process. Hopefully, this pose was as helpful to you as we intended it to be.
Did you like walking through this post? Are you nodding your head in yes? Well then, do share your feedback with your fellow readers. They will surely appreciate the effort. Apart from that, their confidence will also get boosted by this little gesture.
In case you are wondering how to share your feedback with your fellow readers, then let us tell you that you can do so using the comment section. Just type what you have to say and then hit the Enter key.
