Struggling badly with the red light error problem on your router for a long time despite achieving Netgear WiFi router setup success? Let’s get it fixed!
Have you tried various methods to fix the issue? Does nothing seem to be of any help? Walk through the tips given in this tutorial to fix the Netgear Nighthawk red light error.
Situations When You Get Red Light on Your Router
Are you planning to reset Nighthawk router? Hold on! Before taking the plunge, get to know the various situations when your router can show red light error. Maybe you get the fix!
There are various LEDs on a router. Each led has different roles to perform. You need to first check which LED is showing red light and then try to fix the problem accordingly.
For instance, red light revealing on section related to broadband connectivity means there is an issue with your modem or connected cables. On the other hand, red light on the power LED can be due to a problem with the supply of power.
The same applies to other LEDs. If you see the red light on Service LED, this can be due to server authentication issues or power outage. If your modem showing a red light, it means your device is not able to find the DSL signal.
We hope now you would be able to know that each LED on a Netgear Nighthawk router signifies different meaning. So, you need to troubleshoot the red light issue keeping all these things in mind.
Tips to Fix Red Light Error on Netgear Router
Update Your Nighthawk’s Firmware
Make sure your router is running the latest firmware version. If not, update the firmware of your Netgear Nighthawk router by doing login to Nighthawk router. You are advised to download the firmware as per the availability of your router’s model.
Check All the Wired Connections
The red light error can also occur if your devices like router, modem, or PC are not connected to their respective power outlets in a proper manner or are getting insufficient power supply.
Apart from that, if you have used an Ethernet cable to connect your modem and router, then the cable must not have any cuts or damage. If so, replace it with the new one. This may fix the issue you might be facing with your Nighthawk router.
If the problem is not related to the above-listed points and you still see a red LED light on your router, then better to reset and reconfigure your WiFi device by following the proper Netgear Nighthawk setup process.
Handy Steps To Setup Netgear AC1900 Nighthawk Router
Perhaps You have bought a Netgear Wireless AC1900 Nighthawk Router? If so, then you want to proceed onto the process in which you have to put up the router. There are a number of options which have to be known before you start, and it is easy to make a wrong turn.
Here is what you want to put up a Netgear Wireless Router.
- Internet connection
- Netgear wireless router
If you have these two items with you, then you can proceed with the Netgear AC1900 setup process.
Set Up a Netgear Wireless Router
Take a decision as to which router model you want to buy. Netgear Wireless AC1900 Nighthawk Router is among the most popular router versions in the Earth, so in the event that you have chosen for it, then that’s great. If you have chosen some other Netgear version, then be sure it meets your needs in the most suitable way.
- Purchase Router: Buy a Netgear router in search of the best possible price. There are lots of online sites that you can think about for purchasing Netgear Router, but be certain to buy a real product with genuine warranty.
- Position the router: You need to identify the best location for installing the router. The router has to be centrally positioned to limit the distance to clients and ensure uninterrupted and stronger connections.
You want to wait a few seconds or until all of the essential lights on the router start flashing and become steady. Because the router is a complex electronic device, it won’t do the job instantly when it is switched on.
- Launch your internet browser and after that, visit “http://192.168.1.1/” to open Nighthawk login for Netgear. Go through the instructions followed by supplying authentication information.
But if you’re not able to access the net through Netgear Router, then it is possible to consult with Netgear Wireless Router assistance. You can also set up your router via Nighthawk router app.
