Are you trying to configure your Netgear extender but all your efforts are going in vain? Well, if that is the case, then this write-up is what you need to check. Netgear extender setup issues may occur due to various reasons. Having a nudge on the points given below, you will get to know about the reasons causing the Netgear wifi extender setup issue along with learning tips on fixing them. So, without any further ado, walk through the troubleshooting hacks given below and fix the Netgear extender setup issue in a hassle-free manner. Here we go.
Reasons Causing Netgear Extender wifi Setup Issue
- Improper Cable Connections
- Bad Placement of Extender
- WiFi Interference
- Outdated Web Browser
- Wrong Web/IP address
- Incorrect Login Details
- Improper Execution of the Setup Process
Wondering how to get all these fixed? Wonder no more! Simply check the fixes given in the next section.
Tips to Troubleshoot Netgear wifi Extender Setup Issues
Check Cable Connections
The very first thing you need to do is to check the connection between your router and extender. If the Ethernet cable used for connecting both the devices is torn off, consider replacing it with a new cable.
Just in case you don’t have access to another cable at the moment, connect your router and extender using a wireless source.
Relocate the Extender
To get success with the Netgear extender setup process, it is suggested that you keep both your extender and router in the same room. However, after completing the configuration, the location of the extender can be changed.
Moreover, if you have placed the extender in a far corner of your home or inside a cabinet, then also you may get caught with the mywifiext.net not working issue, resulting in Netgear extender setup failure. So, place your extender somewhere in the center of your home and over a higher surface.
Keep WiFi Interference Away
Another reason that can create the Netgear extender setup issue could be things placed near your extender and router. Yes, you read it right! There are various things that can interfere with the signals of your extender or router and take you into the mess of the issue you are currently struggling with.
In such a situation, you are advised to keep WiFi interference away. To name a few, you can keep things like Bluetooth speakers, microwave ovens, refrigerators, baby monitors, and cellular phones away from your WiFi devices.
Update Your Web Browser
Netgear extender setup issue can also occur if the web browser you are using to access the 192.168.1.250 IP address is not up-to-date.
For getting the issue fixed, all you need to do is update your web browser to the latest software version. If on your device, an additional web browser is installed that is up-to-date, you can also switch to the same. However, make sure the web browser you select must not be accumulating the junk of cache and cookies.
Read more- Resetting Netgear Extender: A Comprehensive Guide for Beginners
Cross-check Login Details
First-time installation of Netgear extender can be done using the default username and password. If you are not aware of the login details, you can check the manual that came along with the device at the time of purchase.
While using the details, however, make sure you enter them correctly to their respective fields. Also, know that Netgear extender login details are case-sensitive. So, make sure the Caps Lock of your device is turned off.
Confirm the Netgear wifi Extender Setup Process
Chances are that you are not following the right steps to execute the Netgear extender setup process. Perhaps, you did not understand the Netgear WiFi extender lights meaning before initiating the process. If that’s the case, go through the steps given below and learn how to do the Netgear extender setup.
- Unpack your extender and install its antennas in a proper manner.
- Once done, get hold of an Ethernet cable and connect your extender to the home router using it.
- Time to power up your extender! For this, plug the power adapter of your Netgear extender into a power socket and turn the power button on.
- Now, open a web browser on your device and type the default IP/web address in the address field.
- Press Enter and you will be redirected to the Netgear extender login page.
- Reaching here, enter your login details and click Log In.
- The moment you complete the process, the Netgear Genie setup wizard will reveal on your system’s screen.
- Next, follow the on-screen prompts revealing your system’s screen and complete the Netgear extender setup process.
- Once done, relocate the extender to the location of your choice and start using the internet the way you fancy.
This is all about how to do Netgear wifi extender setup and fix various setup-related issues. We hope that after reading the points given in the post, you’ll be able to make your extender up and running in a hassle-free manner.
